1、招标条件 |
项目概况：武汉华星光电第6代LTPS(Oxide)LCD/AMOLED显示面板生产线建设项目 |
资金到位或资金来源落实情况：资金已到位 |
项目已具备招标条件的说明：具备招标条件 |
2、招标内容： |
招标项目编号：0714-1540CSOTT007/126-144 |
招标项目名称：武汉华星光电第6代LTPS(Oxide)LCD/AMOLED显示面板生产线项目 |
项目实施地点：中国湖北省 |
招标产品列表(主要设备)： |
序号 |
产品名称 |
数量 |
简要技术规格 |
0714-1540CSOTT007/126 |
配向膜涂布前基板清洗机/光配向清洗机 |
1台/1台 |
设备用途及基本要求： 本设备主要用于LTPS(Oxide) LCD/AMOLED of Before PI Cleaner & Photo Alignment Cleaner。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/127 |
阵列测试机 |
1台 |
设备用途及基本要求： 本设备主要用于阵列最终检查工程中判断缺陷种类。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/128 |
彩膜垫料高度测量机 |
1台 |
设备用途及基本要求： 本设备主要用于对位于彩膜上的垫料高度及其他特性值的测量。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/129 |
彩膜宏观检查机/点灯后包装机 |
2台/1台 |
设备用途及基本要求： 本设备主要用于本设备主要用于TFT LCD 的基板mura的检查及切割之后的LTPS(Oxide) LCD Chip放入Tray，并且实现Tray的堆叠，套袋与抽真空包装。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/130 |
彩膜镭射修补机 |
2台 |
设备用途及基本要求： 本设备主要使用研磨和镭射方式修补6代CF基板的缺陷。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/131 |
阵列自动光学检查机 |
4台 |
设备用途及基本要求： 本设备主要用于TFT产品的自动缺陷检测。要求该设备采用TDI CCD，结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/132 |
阵列断线修补机/阵列镭射修补机/激光修补机 |
1台/1台/2台 |
设备用途及基本要求： 本设备主要用于LTPS process 6代缺陷修补。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/133 |
测试组件机 |
1台 |
设备用途及基本要求： 本设备主要用途是对测试面板进行精确定位，搭配组件测试机设备用于LTPS工艺液晶显示器中SD与ITO2制程后阵列电性检查。如薄膜晶体管特性（包括 阈值电压、电子迁移率、开态电流、关态电流、亚阈值电压），电阻，电容。要求该设备结构设计合理，技术成熟，具有良好的动态品质，操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/134 |
玻璃基板分段切割机 |
1台 |
设备用途及基本要求： 本设备主要用于G6基板进行4/6/8分切以及非对称切断的工艺，含玻璃的划线，裂片，分片等功能。本设备的传送系统能对应0.6T~1.4T（合板）的玻璃基板。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/135 |
基板分段切割后清洗机 |
1台 |
设备用途及基本要求： 本设备主要用于基板分段切割后清洗机。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/136 |
偏光板贴付脱泡机 |
3台 |
设备用途及基本要求： 本设备主要用于LTPS Panel偏贴后之加压脱泡。本设备的传送系统能对应0.3~1.0T的玻璃基板。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/137 |
激光修补机 |
4台 |
设备用途及基本要求： 本设备主要用于LTPS(Oxide) Chip的点，线不良缺陷的镭射修补。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/138 |
偏贴高空输送机/分段基板包装机/分段基板解包机 |
3台/1台/1台 |
设备用途及基本要求： 本设备主要用于分段基板的包装及解包，以及分段基板被切割成LTPS Panel偏贴前之高空传送。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/139 |
偏贴前洗净机/偏光板自动贴付机 |
3台/3台 |
设备用途及基本要求： 本设备主要用于LTPS Panel偏贴前表面自动清洁及清洁后的偏光板自动贴付。本设备的传送系统能对应0.2~1.0T的玻璃基板。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/140 |
液晶面板移载机A型/阵列厂 |
27台 |
设备用途及基本要求： 本设备连接主要工艺设备和AMHS设备，放置Cassette & Glass，提供或接受基板，辅助主要工艺设备进行制程。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/141 |
液晶面板移载机A型/彩膜厂/液晶面板移载机A型/成盒厂 |
6台/3台 |
设备用途及基本要求： 本设备连接主要工艺设备和AMHS设备，放置Cassette & Glass，提供或接受基板，辅助主要工艺设备进行制程。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/142 |
液晶面板移载机SS型/成盒厂/液晶面板移载机B型/成盒厂 |
4台/10台 |
设备用途及基本要求： 本设备连接主要工艺设备和AMHS设备，放置Cassette & Glass，提供或接受基板，辅助主要工艺设备进行制程。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/143 |
液晶面板机械手臂A型/阵列厂/液晶面板机械手臂A型/彩膜厂/液晶面板机械手臂A型/成盒厂 |
27台/ 6台/ 14台 |
设备用途及基本要求： 本设备连接主要工艺设备和LUL设备，放置卡匣或平台，提供和/或接受基板，辅助主要工艺设备进行制成。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
0714-1540CSOTT007/144 |
液晶面板机械手臂B型/成盒厂 |
10台 |
设备用途及基本要求： 本设备连接主要工艺设备和LUL设备，放置卡匣或平台，提供和/或接受基板，辅助主要工艺设备进行制成。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑，整机运行稳定可靠，售后服务优良。 |
|
3、投标人资格要求 |
投标人应具备的资格或业绩：投标人应是响应招标、已在招标机构处领购招标文件，并参加投标竞争的法人或其他组织。凡是来自中华人民共和国或是与中华人民共和国有正常贸易往来的国家或地区的法人或其他组织均可投标。 |
是否接受联合体投标：不接受 |
未领购招标文件是否可以参加投标：不可以 |
4、招标文件的获取 |
招标文件领购开始时间：2017-04-26 |
招标文件领购结束时间：2017-05-05 |
获取招标文件方式：现场领购 |
招标文件领购地点：中国电子进出口总公司, 北京市海淀区复兴路17号国海广场A座新中电大厦21层 |
招标文件售价：详见招标文件 |
其他说明：请各投标人登陆中国电子进出口总公司招标采购网http://.ceiec.com.cn/ 进行招标文件的购买和下载。 |
5、投标文件的递交 |
投标截止时间（开标时间）：2017-05-17 10:00 |
投标文件送达地点：中国电子进出口总公司北京市海淀区复兴路17号国海广场A座新中电大厦19层 |
开标地点：中国电子进出口总公司北京市海淀区复兴路17号国海广场A座新中电大厦19层 |
6、联系方式 |
招标人：武汉华星光电技术有限公司 |
地址：湖北省武汉市东湖新技术开发区左岭镇左岭大道1号 |
联系人：黎伟平 |
联系方式 ：+86 755 8690 7005 |
招标代理机构：中国电子进出口总公司 |
地址：北京市海淀区复兴路17号国海广场A座新中电大厦 |
联系人：高攀，赵天舒 |
联系方式 ：010-52579309；010-52579305 |
1. Conditions |
Overview：Wuhan CSOT G6 LTPS(Oxide)LCD/AMOLED Display Project |
Source of Funds：ok |
Description of The Prepared Conditions：ok |
2. Content： |
No：0714-1540CSOTT007/126-144 |
Project Name：Wuhan CSOT G6 LTPS(Oxide)LCD/AMOLED Display Project |
Place of Implementation：Wuhan Hubei |
List of Products： |
NO. |
Product Name |
Quantity |
Main Technical Data |
0714-1540CSOTT007/126 |
Before-PI Cleaner/Photo Alignment Cleaner |
1set/1set |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/127 |
Array Tester |
1set |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/128 |
CF PSH |
1set |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/129 |
CF Off Line Macro/After Light On Test packing |
2sets/1set |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/130 |
CF Laser Repair |
2sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/131 |
Array AOI |
4sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/132 |
Array Laser CVD Repair/Array Laser Repair/Laser Repair |
1set/1set/2sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/133 |
Test Element Group |
1set |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/134 |
CELL Pre Cutting Scriber |
1set |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/135 |
After Pre Cut Cleaning |
1set |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/136 |
POL attach auto clave |
3sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/137 |
Laser Repair |
4sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/138 |
Panel over head conveyor/Q panel Packing/Q panel Unpacking |
3sets/1set/1set |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/139 |
Before polarizer attach panel cleaner /Auto polarizer attach machine |
3sets/3sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/140 |
Array A type Loader/Unloader |
27sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/141 |
CF A type Loader/Unloader/CELL A type Loader/Unloader |
6sets/3sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/142 |
CELL SS type Loader/Unloader/Cell B type Loader/Unloader |
4sets/10sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/143 |
Array A type Robot/CF A type Robot/CELL A type Robot |
27sets/ 6sets/ 14sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
0714-1540CSOTT007/144 |
Cell B type Robot |
10sets |
This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
|
3.Qualification Requirements For Bidder |
Qualifications or Performance：Bidders are legal persons or other organizations who participate in . This Invitation for Bids is open to all suppliers from within the People"s Republic of China (hereinafter abb. as "PRC") and all countries/areas which have regular traderelations with PRC. Bidders must pay for the documents and register for the record, otherwise the bidder has no qualification to attend the bid. |
Joint Bids：NOT Available |
Bid without the documents：NOT Available |
4.Acquisition of documents |
Beginning of Selling documents：2017-04-26 |
Ending of Selling documents：2017-05-05 |
To Obtain：On-site Purchase |
Place： documents Selling Counter, Level 21, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
Price of documents: See documents |
Additional Instructions：The bidder needs to register before the tender on www.china.com. And the evaluation results will be released on www.china.com |
5.Bid Submission |
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time)：2017-05-17 10:00 |
Place of Bid：CEIEC, Level 19, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
Place of Bid Opening：CEIEC, Level 19, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
6.The bidder needs to register before the tender on www.china.com. And the evaluation results will be released on
www.china.com. |
7.Contact Details |
Purchasers：Wuhan China Star Optoelectronics Technology Co.,Ltd |
Add.：NO. 1 .ZuoLing road ZuoLing Street Wuhan East Lake High-tech Development Zone,WuhanHubei,China |
Contact：LI weiping |
Tel：86 755 8690 7005 |
Agency：CEIEC |
Add.：New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
Contact：Gao Pan,Zhao Tianshu |
Tel ：010- 52579309;010- 52579305 |
|
|
点击图片查看原图
